Labtron

Fully-automatic Kjeldahl Analyzer LKA-C10 conducts titration and distillation simultaneously so as to neutralize the ammonia gas released which enhance the test efficiency and avoid the overflow of ammonia. It stand with a measuring range from 0.1 to 200 mgN which gives a maximum recovery of ≥ 99.5 %. The operating ambient temperature of the device starts from 10 °C to 35 °C. 8.0-inch LCD touch screen is used to set the distillation time, the amount of diluent, acid liquor and alkali. Diaphragm pump is used to add reagent so that the injure caused by high pressure pump can be neglected. Wirel

Automatic Potentiometric Titrator LPTT-A11 is equipped with burette valve integrated design, to avoid mutual interference of different titrimetric solutions. Built in with large and bright LCD screen display. During operation, stirring system is adopted for adjusting the stirring speed. Microprocessor controlled system automatic potentiometric titrator is designed to make performing titrations easier, more reproducible and more reliable than manual titrations. It performs automatic identification of pH standard solutions, also supports manual identification.

Microwave Digestion System LMWD-B11 is newly designed and fully upgraded with higher performance and safer protection system. Vessel quantity of 10 and vertical design for even distribution of microwave with multi safety protection functions. Equipped with contactless sensor monitoring with no burst disk design saves consumables cost and maintenance cost. Designed with 7 inch color touch screen with user-friendly interface for easy operation. Material used TFM material for inner vessel and PEEK glass material for outer vessel prevents corrosion. Offers free temperature and pressure measuremen

Fiber Analyzer LFBA-A10 is designed with hidden solution, advance barrel pull structure to facilitates dosing operation, provide flexible, and safe fiber analysis. Advanced integrated infrared heating technology offers fast uniform heating of the crucible, more consistent sample extraction, higher extraction recovery, improved accurate test results. The crucible recoil function designed to prevent sample in the crucible cannot caking filtration. It can analyse crude fiber and Van Soest analysis to wash the fiber.

FTIR Spectrometer LIR-B10 offers gold coated reflecting mirrors to cover maximum light throughput with detection sensitivity with multilayer Ge coated KBr beam splitter specification, aluminum based cast design layout structure, and high intensity, long lasting air cooled infrared source. Designed with 7800 cm-1 to 350 cm-1 spectral range with high S: N ratios of up to 20,000:1. This FTIR executes operations such as scanning, data manipulation, quantitation, reporting, saving, user administration, and more. Features advance FTIR software workstation, adjusted for all versions of windows opera

Dust Monitor LDMR-A10 based on light scattering principle is a portable unit which counts as well determine the mass concentration of particulates. Additionally it displays battery levels, flow rate, pump details etc. on the screen. SD card slot and USB port are available to store and transfer data respectively. It is widely used in laboratories, research institutes, industries, quality control department etc.

Stereo Microscope LSM-D11 is a zoom stereo microscope, with 45° inclined trinocular viewing head. With 4:5:1 zoom ratio, wide range zoom magnification of the specimen is observed in this microscope. Equipped with Built-in transformer with adjustable intensity for surface and sub stage illumination. Incorporated with bench stand, and a low-profile base for the ergonomics operations.

Plant Growth Chamber LPGC-B11 with 350 L capacity is used to study or simulate different climatic conditions accurately. It offers without lighting: 0 to 50℃, with lighting: 10 to 50℃ temperature range, without any humidity controller. Designed with double wall highly insulated stainless steel inner chamber with semi-circular arcs at its corners for easy cleaning.

Internal Calibration Analytical Balance LINB-A15 is a high speed analytical weighing balance. Built-in magnetic sensor for faster weighing with stability. Equipped with a weighing capacity of 220 g with minimum weighing of 0.0004 g and 80 mm of pan size. The panel features five operational buttons with a slide glass windscreen for easy operation and an automated internal calibration.

Horizontal Autoclave LHA-I11 is a floor standing unit which has a built in printer and a touch screen display to preset the parameters. It has a capacity of 80 L. The process of water filling, heating up, sterilizing and drying are fully automated. Alarm system to show the completion of cycle and fault messages is included. It has Electric lock door system to ensure the safety of user and also the equipment. It can be used to sterilize various material in operation room, labs, oral department, ophthalmology etc.

Bench top turbidity meter (with built-in printer) LTM-C12 comes with microprocessor controlled system, works on 90° scattered light principle to measure water turbidity in nephelometric turbidity unit i.e. NTU. The formazine standard solution of turbidity mentioned in ISO 7027 is used for turbidity analysis. This turbidity meter delivers highly accurate results with better numerical calculations to meet GLP standards.

Garments Moisture Meter LGMA-A10 is also called as Textile Moisture Meter. It offers 0 to 40 % measuring range. The scanning depth is 50 mm and 0.1 % resolution. Features with non-destructive testing just the probes touch the surface being measured, that is able to display the current moisture content, without damaging the object to be detected. It offers advanced sensors, moisture measurements of cotton, polyester, linen, and velvet, wool, and acrylic, polypropylene fiber, pure or blended.

Semi-automatic Biochemistry Analyzer LSBA-A11 also known as chemistry analyzer is a tabletop unit, offers absorbance ranges from -0.3 to 3.0 abs and temperature accuracy of ± 0.1°C. Equipped with different wavelengths such as 340 nm, 405 nm, 510 nm, 546 nm, 578 nm, 620 nm + 2 free positions. Incorporated with standard interface for communication, convenient for data processing and transmitting. It provides easy, quick and accurate diagnosis of diseases, blood samples and other body fluid, identification of gene disease and evaluation of organ function.

Labtron LDMT-A10 density tester is simple and compact. The control box adopts humanized design and the control switch adopts light-touch mode. The instrument is designed and made as per ASTM D1298 “Test Methods for Density of Petroleum and Liquid Petroleum Products (Densimeter Methods)”.

Atomic absorption spectrophotometer comes with Deuterium lamp for background correction, RS232 interface, Multi-linear and nonlinear curve fitting. Its double beam system automatically compensates the light source drift and wavelength drift caused by the variation of temperature and electronic circuit drift so as to reach a good basic line stability. The specially designed fine light beam passes through the flame to ensure a high precision analytical test and low characteristic concentration in this atomic absorption spectrophotometer. It has multiple applications in research and development

Integrated Industrial Ultrasonic Cleaner LIUC-A10 is a 38 L capacited unit integrated with industrial based transducer and a powerful ultrasonic generator providing efficient high level tabletop cleaning. With a cleaning duration of 1 ~ 99 mins efficient intensive cleaning of instruments and products is done making them contamination, rust and germ free. Its key feature is the variance of using it at 28 KHz for gross rinse to 40 KHz for intensive rinse.

Elemental (CHN) Analyzer LCHN-A10 is used to determine Carbon, Hydrogen and Nitrogen in macro amount of samples. Features dual stage furnace with pure oxygen flow for complete combustion, multiple detector, blended gas analysis, IR CO2 monitor detector, stackable auto loader etc. to ensure efficient performance and obtain reliable results.

It offers high throughput with 3 shaking modes, fast reading speed of 5 seconds and malfunction alarm system along with 96-well multimode and bichromatic multi-channel optical system. Different detection modes like comprehensive qualitative and quantitative data-evaluation functions with cut-offs, curve-fits and transformation formulas are available. It is a basic tool in drug detection and life science research, bioassay testing and quality control pharmaceutical processes.

Standard Freeze Dryer LPFD-C10 is designed to handle lyophilization needs for scale up production. Equipped with 10 kg condenser capacity and a temperature of -80 °C for effective lyophilization. It's ideal for freeze drying samples with low eutectic temperatures. The temperature controllable shelves are designed for complete moisture removal and storage facilities of various biological materials. Precise vacuum control enables faster freeze drying and reproducible results.

Automatic Colony Counter LCCA-A10 is equipped with high resolution CCD Camera lens. Incorporated with advanced Smart Counter software for accurate automatic microbial colony counting. Open platform design, bottom LED light source makes it user friendly counter. Encrypted USB-key guarantees data security, and convenient data management.